Vestfrost VTS 258 Mode D'emploi page 17

How to change language:
1. Enter the SERVICE menu
2. Select LANGUAGE sub-menu
3. Push the ENTER key and the LANGUAGE menu is entered.
4. Push the SET key and then use the UP and DOWN keys to select the language and then
the SET key to confirm it.
Data menu:
From the main view push the DATA key and the DATA menu is entered.
See below picture:
LOG: Enter the data logged by the controller.
EXPORT: Export the data to an USB pen drive delivered with the appliance.
GRAPH: Enter the graph showing the temperature logged the last 24h (with a logging inter-
val of 15min.)
How to enter the log:
1. Enter the DATA menu
2. Select LOG sub-menu
3. Push the ENTER key and the LOG menu is entered.
4. By UP and DOWN keys chose the data interval to display
5. Push the ENTER key to display the selected data.
NOTE: THE KEY: IS USED TO STOP AND START LOGGING
17
GB