Vestfrost VTS 258 Mode D'emploi page 15

Keys – main view:
SET: Enter the Set Point menu of the temperature
SERVICE: Enter the Service menu
DATA: Enter the Data Logging menu
ALARM: Enter the Alarm menu
How to see and modify the temperature Set Point:
1. Push and immediately release the SET key: the display will show the Set Point value.
2. To modify the value push the SET key, the Set Point start flashing.
3. Use the UP and DOWN keys to modify the value.
4. To memorize the new Set Point value push the SET key again or wait 30sec.
15
GB