Tro Ubl Es Ho Oti Ng - USRobotics MAXg Guide D'installation Rapide

English
3. When the computer completes the uninstallation, turn off the computer and
physically remove the adapter from the computer.
Windows XP
1. Click Windows Start > Control Panel > Add or Remove Programs >
USRobotics Wireless MAXg USB Adapter and then Remove.
2. When the computer completes the uninstallation, turn off the computer and
physically remove the adapter from the computer.
Windows 2000
1. Click Windows Start > Settings > Control Panel > Add/Remove Pro-
grams > USRobotics Wireless MAXg USB Adapter and then Remove.
2. When the computer completes the uninstallation, turn off the computer and
physically remove the adapter from the computer.

Tro ubl es ho oti ng

Basic Troubleshooting Procedure
This procedure addresses a number of symptoms that you might experience with
your wireless network:
1. Verify the physical cable connections between all of your networking devices:
access point (if present), router, and modem.
2. Ensure that the power outlets to which these networking devices are con-
nected are live outlets.
3. Check the LEDs on the networking devices to make sure you are receiving
power and that are no errors.
4. For connectivity issues, reboot your DSL or cable modem and wait for the
LEDs to stabilise, then reboot your router and wait for the LEDs to stabilise,
then reboot your access point (if present) and wait for the LEDs to stabilise.
Finally, reboot your computer.
Other devices connected to the router may need to re-establish their network
connections.
5. Some electronic devices, such as 2.4GHz - 5.8 GHz phones and microwave
ovens, may interfere with the wireless signal and affect your wireless range
and link quality. Try creating a wireless connection on a different channel.
6. Low link quality or range can be caused by environmental interference, such
as lead-based paint and concrete walls. Try to move the antenna of the router
or access point, or reposition the computer or wireless adapter. If possible,
ensure that there are no obstructions between the wireless adapter and the
router, or if you are using an access point, between the wireless adapter and
the access point.
8