USRobotics MAXg Guide D'installation Rapide page 7

A. If the Found New Hardware Wizard asks to connect to the Windows
update Web site to search for software, select No, not this time and click
Next.
B. With Install the software automatically selected, click Next.
8. If a window appears warning that the software has not passed Windows test-
ing, continue with the installation. USRobotics has thoroughly tested the
operation of the software with Windows to ensure its safe operation.
Windows Vista: Click Install driver software anyway.
Windows XP: Click Continue Anyway.
Windows 2000: Click Yes.
9. Windows XP only: Click Finish.
10. When prompted, click Restart to restart your computer.
11. Select the option that matches your wireless network and follow the on-
screen instructions to connect to a network.
C o n g ra t u l a t i o n s . You have successfully completed the installation proce-
dure. Please register your Wireless MAXg USB Adapter at
.
treg/
Using the USRobotics Wireless Utility
Users of Windows XP or 2000 have access to the USRobotics Wireless Utility
once the Wireless MAXg USB Adapter is installed. This utility is used to change
or verify configuration information for the adapter. You can view, create, and edit
settings and perform diagnostic tests on the adapter and its wireless connection.
You can open the utility in either of the following ways:
! Right click the utility icon in the system tray and click Open Utility.
! Select USRobotics Wireless Utility from the Start menu's programs folder.
The colour of the utility's icon indicates the status of your wireless connection:
red for disconnected, yellow for connected with fair quality, and green for con-
nected with good quality.
Uninstalling the Wireless MAXg USB Adapter
Windows Vista
1. Click Windows Start > Control Panel > Programs > Programs and Fea-
tures.
2. Select USRobotics Wireless MAXg USB Adapter, then click Uninstall.
English
www.usr.com/produc-
7