Temperature Setting; Cleaning & Maintenance - EQUATION HD15BDC Notice De Montage - Utilisation - Entretien

mode. Then Press
continuous heating, press M button to choose the desired mode.
Once power cut and then supplied, heater will enter standby mode. Press
heater return to working under previous working mode before power cut.

TEMPERATURE SETTING

Under comfort mode
to choose the desired temperature.
Default temperature of comfort mode is 19° C, temperature can be adjusted from
5° C to 30° C.
Default tempearature of ECO mode is 18.5° C, temperature can be adjusted from
4.5 ° C to 0.5 ° C lower than comfort mode.
Default temperature of anti-freeze mode is 7° C, temperature can be adjusted
from 5° C to 10° C.
Each time you press the buttons to adjust the temperature, you increase or
decrease the temperature by 0.5 ° C. Press other buttons except
the setting, or after 5 seconds it will automatically finish.
4. CLEANING & MAINTENANCE
• Always disconnect appliance from the main when you clean it.
• In order to avoid any hazard, only clean the appliance with a dry rag
lightly humidified.NEVER IMMERSE THE HEATER TO CLEAN IT
•
To avoid any electrical hazard, clean your appliance with a soft and
clean rag to remove the dust. You can also use a vacuum cleaner to
clean the air openings.
•
Clean your appliance regularly.
, heater return to wok in previous setting mode which is
or Eco mode or Antifreezing mode
FR
PT
EL
,
RO
EN
, press or
/ to finish
31