SEVERIN Piccola Semplice Mode D'emploi page 51

Display Cause
The grind mechanism
is blocked.
The door of the brew-
brewing unit
ing unit is not closed.
door oPen.
After the cover of
rinsing
the brewing unit has
necessarY.
been opened, rinsing
Please
Press becomes necessary.
ok-button.
Version 2 2014-11
Remedy
Set the grinder regulator on
the coarsest fineness (►"7.1
Setting the grinding fineness")
and prepare another coffee
speciality.
If this solves the problem, set
the desired fineness again for
the next beverage.
If problem persists, contact
customer service.
Properly close the door of the
brewing unit.
Press OK; rinsing will start
automatically.
Display Cause
There is not enough
water suP-
water in the brewing
PlY error.
unit.
The grinder is
grinder
blocked.
blocked.
Please
contact
service.
Remedy
Make sure the water tank is
firmly fitted.
Clean the water tank and
especially its water discharge
on the floor.
Fill the water tank halfway
with cold drinking water and if
necessary, remove the water
filter and replace it.
'Bleed' the water filter by filling
it with water and replacing it in
the tank.
If problem persists, also clean
the brewing unit (►"8.3
Cleaning the brewing unit").
Set the grinder regulator on
the coarsest fineness (►"7.1
Setting the grinding fineness")
and prepare another coffee
speciality.
If this solves the problem, set
the desired fineness again for
the next beverage.
If problem persists, contact
customer service.
51
GB