Parts Identification - Panasonic ES8228 Manuel D'utilisation

Parts identification
�
�
�
CLEAN
DRY
� CHARGE
STATUS
�
�
�
�
�
�
�
�
�
�
�
�
�
 Protective cap
 System outer foil
 Inner blades
 System outer foil release
buttons
 Pivot action selector
 Finger rest
4
SELECT
�
�
�
�
�
�
�
�
 On/Off switch
 LCD panel
 Trimmer
 Trimmer handle
 Adaptor
 Power cord
 Appliance plug
 Self-cleaning recharger
(Referred to as the
"Recharger".)
 Detergent cartridge
 Water tank
 Socket
 Water tank cap
Operating environment for the self-cleaning
recharger
Operating temperature: 15-35 °C (59-95 °F)
Operating humidity: Less than 95%
• If you use the self-cleaning recharger in temperatures outside the
above range, the following problems may occur.
- The time it takes to charge the shaver increases.
- The recharger stops functioning.
- The lifespan of the rechargeable battery shortens. (Only when
you use the recharger in lower temperatures.) In this case the
backlight of the LCD panel will blink twice every second.
• If and the backlight of the LCD panel does not glow, wait for a
short while until it glows.
• Depending on the environment, the shaver may not dry even if
you select a course that includes the "Dry" function. In this case,
wipe off any drops of water with a dry cloth.
 Clean lamp
 Dry lamp
 Charge lamp
 Status lamp
 Select button
 Cleaning tray
 Feed water line