The "Loco" Menu - z21 Roco FLEISCHMANN WLAN-MULTIMAUS WLANmaus Manuel D'utilisation

Menus

1. The "LOCO" Menu

The WLANmaus uses the "LOCO" menu to manage all data which is required for the locomotive library
and for identification of a locomotive. You can also use this menu to set the WLANmaus to library or
address mode.
1.1 "NEW"
use this menu item to add a new locomotive to the library. The sequence of steps is described and
depicted in detail starting on page 45.
1.2 "EDIT"
you change the data for a locomotive in the library using this menu item.
If, for example, only the locomotive address is changed but the name and speed steps remain un-
changed, you can skip these items without editing them by pressing the OK-key. The first screen
shows the locomotive last used in locomotive mode. you select the locomotive for which you wish to
make changes, using the arrow keys
▪
To confirm, press the OK-key.
You now have the option of changing the locomotive name. The cursor flashes in the first place. You
use the left arrow key to delete letters / numbers and can re-enter them using the function keys. Text
can be entered or amended at the current position by using the right arrow key. Another country
language can be set in the "
▪
To confirm, press the OK-key.
you can correct the locomotive address as previously described.
▪ To confirm, press the OK-key
you correct the speed steps using the arrow keys.
▪ To confirm, press the OK-key. you return to the start level "EDIT".
A change to the locomotive address in the library has no effect on the address stored in the loco-
motive decoder. It can be changed using "CV1". See the Chapter 2.6 "Quick Programming" on
page 52 or the menu item 2.1 "CV MODIFICATION" on page 60 in the "PROGRAMMING" menu.
1.3 "DELETE"
you use this menu item to remove a locomotive from the library.
The first screen shows the locomotive last used in locomotive mode. Use the arrow keys to select the
locomotive you wish to remove.
▪ To confirm, press the OK-key .
The scrolling text "DELETE LOCO?" appears in the next screen.
▪
Press OK-key to confirm the deletion action again. This returns you to the "DELETE" start level,
as indicated by the
The locomotive is removed from the library and, if it is still travelling, is stopped automatically (selec-
tive emergency stop). The locomotive can only be controlled using locomotive address mode until it
is entered in the library again.
58
58
8010813920.indd 58
" submenu.
LANGuAGE
at the bottom of the display.
13.07.2017 10:27:49