Remote Button Descriptions; Index - Sony TA-VE700 Mode D'emploi

Remote Button Descriptions

For buttons not described on previous pages and buttons with names different from the buttons on the main unit.
Remote
Operates
Button
0-9 Tuner
CD player/MD
deck/LD player
TV/VCR
CH/PRESET Tuner
+/–
TV/VCR

INDEX

Tuner
D. SKIP CD player
0/)
CD player
Tape deck/MD
deck/VCR/LD
player
=/+
CD player/
MD deck/LD
player
P
CD player/
Tape deck/MD
deck/LD
player/VCR
(
CD player/
Tape deck/MD
deck/LD
player/VCR
p
CD player/
Tape deck/MD
deck/LD
player/VCR
9
Tape deck
r
Tape deck
r + (
Tape deck/
MD deck/
VCR
RMS Tape deck
DIRECTION
RMS CLEAR Tape deck
Function
Selects preset numbers.
Selects track numbers.
0 selects track 10.
Selects channel numbers.
Scans and selects preset
stations.
Selects preset channels.
Selects station index
names for index select
tuning.
Skips discs (CD player
with multi-disc changer
only.)
Searches tracks (forward
or backward).
Fast forwards or rewinds.
Skips tracks.
Pauses play or record.
(Also starts recording
with components in
record standby.)
Starts play.
Stops play.
Starts play on the reverse
side.
Sets tape decks to the
record standby mode.
Starts recording when
pressed with ( (or 9
on tape deck).
Selects tape direction (for
tape decks with the RMS*
function.)
Clears RMS* programme
(for tape decks with the
RMS function.)
Remote
Operates Function
Button
RMS Tape deck Programmes tracks (tape deck
DIRECTION with the RMS* function only).
9/(
ENTER TV/VCR Changes channels when used
with 0-9.
TV/VIDEO TV/VCR Selects input signal: TV input
or video input.
VISUAL TV/VCR/ Turns on or off the power.
POWER LD player
TV CONTROL TV Turns on the TV, switches the
ON input to "TV," and sets the
remote to operate the TV.
-/- - TV Selects the channel entry
mode, either one or two digit
(in Europe only).
SUB CH +/– TV Selects preset channels for the
small picture.**
POSITION TV Changes the position of the
small picture.**
SWAP TV Swaps the small and the large
picture.**
P IN P TV Activates the picture-in-
picture function.**
JUMP TV Jumps back and forth between
the previous and current
channels.
ANT TV/VTR VCR Selects output signal from the
antenna terminal: TV signal or
VCR programme.
MASTER VOL TV Normally, adjusts the master
+/– volume of the amplifier.
If TV CONTROL ON was
pressed, it adjusts the volume
on the TV.
MUTING TV Normally, mutes the sound
from the amplifier.
If TV CONTROL ON was
pressed, the sound on the TV
itself is muted.
SLOPE — Not applicable.
BAND — Not applicable.
* RMS: Random Music Sensor
** Only for Sony TVs with the picture-in-picture function
Note
Some Sony equipment cannot be controlled by this remote as
shown in the table above.
21 EN