Sony MDR-DS8000 Mode D'emploi page 27

Symptom Cause and remedy
CS (back surround)
, The format of input signal is other than Dolby digital (multi channel) or DTS
indicator does not
light up.
, Dolby digital (multi channel) or DTS (multi channel) sound is not played back.
The batteries
, Dry-cell batteries are being used.
cannot be
charged
, Rechargeable batteries other than supplied or specified batteries are being
(multi channel).
• Play a DVD software of Dolby digital (multi channel) or DTS (multi
channel) format.
• Change the setting on the output component so that the correct format is
input.
First start playback on the connected component, and make sure that the
DECODE MODE indicator lights up, then change the output mode.
Insert the supplied or optional rechargeable batteries.
used.
Insert the supplied or specified rechargeable batteries.
Additional Information
27 GB