Making Home-Made Fries - Philips HD986 Série Mode D'emploi

Table des Matières

Les langues disponibles

3 To confirm the Smart Chef program, press the QuickControl

dial.

» The appliance automatically calculates the ideal

cooking temperature and time. The screen displays the

first estimated cooking temperature and time after a few

minutes. During this time the appliance has already

started cooking. As long as the screen displays the

blinking bars and the temperature/time alternately, the

appliance is still calculating the cooking time, and the

appliance will automatically adjust the time during

cooking.

Note

To prepare a whole chicken, weigh the chicken before placing it

•

in the basket. Choose the weight by turning the QuickControl dial

and pressing it to confirm.

Do not pull out the drawer as long as the appliance is calculating

•

the cooking time, which is indicated by blinking bars on the

display. Otherwise the Smart Chef program will stop, and the

appliance will reset to the main menu. Proceed cooking with

the manual mode because restarting the Smart Chef program

with partially cooked food will lead to a wrong estimation of the

cooking time.

As soon as the calculation phase is finished you will see the

•

temperature and time displayed continuously (without blinking

bars), and you may open the drawer to check the status of the

food.

4 When you hear the bell and see the shake indication

blinking, open the drawer and turn the ingredients or

shake the basket with the ingredients. Then slide the

basket back into the appliance.

5 When you hear the bell and the timer has elapsed to 0, the

food is ready.

Note

If your food is underdone or the food does not reach your prefered

•

browning level, proceed cooking for several more minutes by

pressing the timer button (see steps 11–12 in chapter "Using the

appliance").