Sedus mr. 24 Mode D'emploi page 9

F
Sliding Seat
Seat depth adjustment:
®
Depress the lever and hold
1.
Slide the seat to the desired
2.
depth
Release the lever and the seat
3.
shell will lock into position
I
C
G
Adjusting the 3D armrests
Adjusting the armrest height:
®
Press the button on the outside
1.
of the armrests to reach the
desired height by raising or
lowering the arm.
Release the button on the inside
2.
of the armrest to engage
Adjustment of the armrest
®
covers:
The inside button slides back-
1.
wards to loosen the armrests
Slide the armrests into the
2.
required position (forwards/
backwards, left/right)
Slide the inside button forwards
3.
to lock these settings
Adjusting the armrest width:
®
Loosen the bolts with a
1.
Torx-head screwdriver (TX40)
Move armrests into required
2.
position
Tighten bolts again
3.
G
E
A
F
H
Adjusting the neck support (opti-
onal)
To adjust the height of the neck
®
support:
slide the neck support to the
desired position to the desired
height (five positions)
I
Adjustment of the functional
neck support (optional)
Adjusting the headrest height:
®
Push the headrest to the
desired height (it is contin-
uously adjustable)
Neck support tilt:
®
Bring the optional neck support
to the correct tilt position by
bending at the linking point
English 9