Sedus mr. 24 Mode D'emploi page 8

The functions of the swivel chair
A
Height of the seat
Lowering the seat:
®
Sit down on the seat
1.
Pull the lever upwards
2.
(the seat will drop slowly)
Releasing the lever at the
3.
desired height will lock
the position
Raising the seat:
®
Stand up
1.
Pull the lever upwards
2.
(the seat will rise slowly)
Releasing the lever at
3.
the desired height will
lock the position
B
Angle of the backrest
Adjusting the
®
backrest dynamically:
Pull the lever upwards
1.
and release it
Lean against the backrest
2.
The backrest is automatically
3.
released
Locking the backrest
®
into position:
Lean back until the backrest
1.
reaches the desired angle
Press the lever down and
2.
release it to lock the backrest
into position
8 English
C
Lumbar height adjustment
Increasing the height:
®
Remove your back from the
1.
backrest
Turn the adjustment wheel in
2.
a clockwise direction until the
required height is reached
Decreasing the height:
®
Remove your back from the
1.
backrest.
Turn the adjustment wheel in
2.
an anti-clockwise direction until
the required height is reached
D
Lumbar depth adjustment
Strengthening the lumbar curve:
®
turn the wheel in a clockwise
direction until the required
lumbar strength is reached.
Reducing the lumbar curve depth:
®
turn the wheel in an anti-
clockwise direction to
reduce the lumbar curve
E
Strength of the backrest pressure
Increasing the backrest pressure:
®
Pull out the handle
1.
Crank the handle clockwise
2.
(forwards)
Push the handle back in
3.
Reducing the backrest pressure:
®
Pull out the handle
1.
Crank the handle anticlockwise
2.
(backwards)
Push the handle back in
3.
B
H
D