Additional Safety And Working Instructions - Bosch GDS 18 V-LI HT Notice Originale

OBJ_BUCH-1140-001.book Page 12 Monday, January 25, 2010 1:09 PM
12 | English
Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight,
fire, water, and moisture. Danger of
explosion.
In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
Use the battery only in conjunction with
your Bosch power tool. This measure alone
protects the battery against dangerous over-
load.
Use only original Bosch batteries with the
voltage listed on the nameplate of your
power tool. When using other batteries, e. g.
imitations, reconditioned batteries or other
brands, there is danger of injury as well as
property damage through exploding batter-
ies.
Symbols
The following symbols are important for reading and understanding the operating instructions.
Please take note of the symbols and their meaning. The correct interpretation of the symbols will
help you to use the machine in a better and safer manner.
Symbol Meaning
Cordless impact wrench
Grey-marked area: Handle (insu-
lated gripping surface)
1 609 929 W06 | (25.1.10)
Additional Safety and Working
Instructions
Before any work on the machine (e. g.,
maintenance, tool change, etc.) as well as
during transport and storage, set the rota-
tional direction switch to the centre posi-
tion. Unintentional actuation of the On/Off
switch can lead to injuries.
The battery is supplied partially charged. To
ensure full battery capacity, completely
charge the battery in the battery charger
before using for the first time.
Read the operating instructions of the bat-
tery charger.
Apply the power tool to the screw/nut only
when it is switched off. Rotating tool inserts
can slip off.
When working with an application tool, pay
attention that the application tool is firmly
seated on the tool holder. When the applica-
tion tool is not firmly connected with the tool
holder, it can come loose again and not be
controlled.
The torque depends on the impact duration.
The maximum achieved torque results from
the sum of all individual torques achieved
through impact.
Check the actually reached torque with a
torque wrench.
Symbol Meaning
Article number
Bosch Power Tools