Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
NOTE: Max. operation time: With heavy mixtures, do not operate the
machine for more than six minutes, and then allow it to cool down for a
further ten minutes
NOTE:Always begin mixing at a low speed,then increase to a high speed to
prevent splattering.

Troubleshooting

NO.
Troubles
1
The machine doesn't work
Noise in the mixing bowl
2
when working (the accessory
scraped the bowl)
The bowl cover doesn't fit
3
the mixing bowl properly
The machine doesn't work
4
on certain speed
Movements when the
5
machine working
The rise button didn't
spring back in place after
6
installing the mixing bowl
and pot cover
Solution
·Check if the plug is in good contact with the
socket.
·Check if the rise button spring back in place.
·Check if the machine works continuously
more than 10 minutes, and wait until the
motor cool down..
·Check if the mixing bowl is properly
installed.
·Check if the accessory installed properly on
machine.
Check if the bowl cover placed on the
·
machine properly.
·Check if the mixing bowl installed properly
on machine and locked correctly.
·Check if the mark on speed knob
correspond to the speed silkscreen on
housing.
·Rotate speed knob to 0 ,and re-check if the
machine works .
·Check if the anti-slip feet fall off.
·Check if the machine is placed on a smooth
and flat tabletop.
·Check if the pot cover placed on the
machine properly.
·Check if the mixing bowl is properly
installed.
24

Publicité

Table des Matières
loading

Table des Matières