HEINRICH'S HKM 6278 Instructions D'utilisation page 19

Do not insert anything into the rotating hooks while the machine is
working.
Place the machine on a smooth, flat and stable working surface.
Do not insert the mains plug of the machine into the power socket
without having installed all the necessary accessories.
Overload Protection System
The motor is protected from burning out by a Thermal Protector. If the
appliance is overloaded or
operated continuously for too long, the motor may overheat and stop. To
operate the appliance
again, it must be switched off and disconnected from the power socket then
left for at least 30
minutes. Once the motor is fully cooled the appliance may be used again.
Safety Instructions
The motor will not start if the Mixer Head is raised.If it is raised during normal
operation,the
safety switch will activate and the motor will shut off immediately.
Turn the Speed Control back to 0.Return the head to the locked position to
start the machine again.
19