HEINRICH'S HKM 6278 Instructions D'utilisation page 22

down so that it is in the horizontal position and the Dough Hook,Beater
or Whisk attachment is inside the Mixing Bowl.Release the "Tilt" button.
8. Plug the power cord into the mains supply.This will make the Speed
Control light up and flash blue.
9. Turn the Speed Control clockwise to select a speed and start mixing.The
Speed Control Dial will illuminate blue.It's recommended that mixing is
started at a lower speed to prevent splattering and then increased to
suit the recipe.Consult the Mixing Guide for example speeds.
10. Use the Pulse Function when you require a quick burst of power or for
quick incorporations.Turn the Speed Control Dial in an anti-clockwise
direction and hold it in this position.When the dial is released,it returns
to the "OFF" position automatically.
11. When mixing is complete,turn the Speed Control Dial to the "OFF"
position,switch the appliance off at the power outlet and remove the
power cord from the outlet.
12. Remove the Dough Hook,Beater or Whisk -- Lifting up the Mixer
Head,then
pressure,push the attachment towards the Mixer Head,lifting the
Attachment Shaft spring upwards and twist the attachment in a
clockwise direction.Pull the attachment away from the Attachment Shaft
to remove it from the Mixer Head.
13. Clean the parts as described under "Cleaning".
hold onto the assembled attachment.With
22
some