Ending Dvd Video Playback - Sony SCPH-10420 U Mode D'emploi

z Ending DVD video playback
1
Press the Z open/close button of the DVD remote control or
the A (open) button on the console front.
2
Remove the disc.
3
Press the Z open/close button of the DVD remote control or
the A (open) button on the console front.
The disc tray closes.
4
Press and hold down the I/1 (on/standby) /reset button of
the DVD remote control or the 1 (standby)/reset button on
the console front.
The 1 indicator turns red and the console enters standby mode.
Note
To save changes made during playback, you must stop playback* or eject the DVD
before pressing the 1/reset button on the console front or turning off the console
using the main power switch on the console rear.
Note that changes will not be saved if you reset or turn off the console before
stopping playback, or without first ejecting the DVD.
* Stopping playback during Resume Play is included.
US
9