Working With The Tool; Maintenance And Care; Pad Brake; Accessories, Tools - Festool ROTEX RO 150 FEQ Guide D'utilisation

Working with the tool

Always secure the workpiece in such
a manner that it cannot move while being sanded.
Never overload the tool by using
too much pressure! The best sanding results are
8.1
achieved when applying moderate pressure. Sand-
ing performance and quality depend primarily on
the choice of the right abrasive.
For safe guidance, hold the tool with both hands.
Application
Tables A and B show the settings we recommend
for different sanding and polishing work.

Maintenance and care

All maintenance or repair work
requiring the motor housing to be opened must be
carried out only by an authorized service workshop.
Maintenance or repair work carried out by an unau-
thorized person can lead to the incorrect connection
of the wiring or other components, which in turn
can lead to accidents with serious consequences.
Always remove the plug from the
mains supply socket before carrying out any work
on the machine!
Always keep the tool and in particular the ventila-
tion slots clean.

Pad brake

The rubber collar (9.1) prevents the sanding pad
from revving up to maximum speed in an uncon-
trolled manner during eccentric motion (fi ne sand-
ing). Because the collar wears down in the course
of time, it has to be replaced by a new one (order
no. 465472) as soon as there is any reduction in the
braking effect.

Accessories, tools

For safety reasons, only use original
9.1
Festool accessories and tools!
The accessory and tool order number can be found
in the Festool catalog or on the Internet under www.
festoolusa.com.
Systainer
Many Festool products are shipped in a unique
system container, called "Systainer".
9