Quick H02 Mode D'emploi Et D'installation page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
CHARACTERISTICS AND INSTALLATION
GB
RRC HANDHELD TRANSMITTER
The RRC radio transmitter is a device which combined with a RRC radio receiver is used to control operation of devices or
accessories installed on recreational crafts.
The RRC radio system is a generic radio control whose failed operation must not cause damage to people, animals or
property.
The advantages offered by the RRC hand held radio transmitter are:
• Microcontroller-operated functions.
• Operating temperatures from -15°C to +70°C.
• FSK modulation and carrier frequency 434.420 Mhz.
• LED indication of operational status, low battery and transmission feedback.
• Possibility to control more receivers with one transmitter.
• Two functions can be activated at the same time.
• IP67.
• Floating.
• Also working with rechargeable batteries.
• Keyboard backlighting by means of LEDs.
INSTALLATION
BEFORE USING THE RADIO RECEIVER, CAREFULLY READ THIS USER MANUAL. IN CASE OF DOUBTS
PLEASE CONTACT THE RETAILER OR QUICK
F
In case of discordance or errors in translation between the translated version and the original text in the Italian language,
reference will be made to the Italian or English text.
F
This device was designed and constructed for use on recreational crafts.
Other forms of use are not permitted without written authorization from the company Quick
The RRC handheld radio transmitter has been designed and manufactured for the purposes described in this user manual.
Quick
®
is not liable for direct or indirect damages caused by an improper use of the radio control, due to an incorrect
installation or errors possibly present in this manual.
THE PACKAGE CONTAINS
- conditions of warranty - the present manual of use
APPLYING LABELS (H12 MODEL)
• Use a soft cloth moistened with water to clean the proper surfaces.
• Choose the label to be positioned on the previously cleaned surface.
• Set the label into its seat, make sure that it is positioned correctly, and then press the label against the surface for at least 5
seconds.
WARNING: applying the label is not recommended if transmitter surface temperature is under 10°C.
8
:
handheld radio transmitter with batteries included - protective case - labels (mod. H12) - lanyard
®
CUSTOMER SERVICE.
®
.
5"
RRC H02/12 - REV001A

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

H04H12

Table des Matières