Jacuzzi VIRTUS Manuel D'installation page 42

The pump dedicated to the heat ex-
(#)
changer does not work
The Jacuzzi® Eco Heat/Cool Power heat
pump does not work.
Significant differences in temperature be-
tween the heat pump screen and the hot
tub screen.
(#): pump installed on the circuit prepared by the installer, not provided by Jacuzzi®.
*
: This type of repair requires the intervention of qualified personnel.
Contact your Jacuzzi® dealer or an authorised Service Centre.
It is the responsibility of the installer/owner to ascertain compliance with specific local regulations prior to installation. Jacuz-
zi Europe S.p.A. gives no guarantee in this respect and declines all responsibility regarding the compliance of the installation
performed.
One of the causes could be the incorrect
setting of the "b1/b2" switch bench.
One of the causes could be the incorrect
setting of the "b1/b2" switch bench.
One of the causes could be the incorrect
setting of the "b1/b2" switch bench.
42
Refer to the "Electrical Connections and
Safety" section.
Refer to the "Electrical Connections and
Safety" section.
Refer to the "Electrical Connections and
Safety" section.