Using Optional Equipment; Auxiliary Audio Equipment; Rm-X114 Remote Commander - Sony MEX-BT3000 Mode D'emploi

Using optional
equipment
Auxiliary audio
equipment
By connecting an optional portable audio
device to the AUX input jack (stereo mini
jack) on the unit and then simply selecting
the source, you can listen on your car
speakers.
Connecting a portable audio device
1
Turn off the portable audio device.
2
Turn down the volume on the unit.
3
Connect the portable audio device to the
unit with a connecting cord (not supplied)*.
* Be sure to use a straight type plug.
Adjusting the volume level
Be sure to adjust the volume for each
connected audio device before playback.
1
Turn down the volume on the unit.
Press  repeatedly until
2
"AUX" appears.
3
Start playback of the portable audio device
at a moderate volume.
4
Set your usual listening volume on the unit.
5
Adjust the input level (page 21).
RM-X114 Remote
commander
The corresponding buttons on the remote
commander control the same functions as
those on this unit.
The following buttons on the remote
commander have also different buttons/
functions from the unit.
• DSPL (display) button
To change display items.
• SOURCE button
To turn on the power; change the source
(Radio/CD/AUX/Bluetooth audio/
Bluetooth phone).
• / (SEEK –/+) buttons
To control Radio/CD/Bluetooth audio, the
same as  –/+ on the unit.
• SOUND button
The same as the select button on the unit.
• OFF button
To turn off; stop the source; reject a call.
• / (DISC*/PRESET +/–) buttons
To control CD/Bluetooth audio, the same
as / (ALBUM /) buttons on the
unit.
• ENTER button
To apply a setting; receive a call; end a call.
• ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
23