Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.
Pull and raise the latch lever up to allow free
movement of the carriage arm.
1
► 1. Latch lever
3.
Hold the handle and tilt the carriage to the left.
4.
Align the pointer with your desired angle on the
bevel angle scale.
5.
Tighten the knob clockwise to secure the carriage
arm.
2
► 1. Knob 2. Handle 3. Pointer 4. Bevel angle scale
4
3
1
Tilting the circular saw blade to the
right
1.
Rotate the knob on the slide pole
counterclockwise.
2.
Hold the handle and tilt the carriage to the left
slightly.
3.
Tilt the carriage to the right while pressing the
releasing button for right side bevel angle.
4.
Align the pointer with your desired angle on the
bevel angle scale.
5.
Tighten the knob clockwise to secure the carriage
arm.
1
4
3
► 1. Knob 2. Handle 3. Releasing button for right side
bevel angle 4. Bevel angle scale
17 ENGLISH
2
Publicité
Table des Matières
