Custom Setup; Audio Setup - Sony SMP-U10 Mode D'emploi

Masquer les pouces Voir aussi pour SMP-U10:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CUSTOM SETUP

Use this to set up playback related and other
settings.
The default settings are underlined.
◆ AUTO POWER OFF
Switches the Auto Power Off setting on or
off.
OFF
ON
◆ AUTO PLAY
Switches the Auto Play setting on or off. This
function is useful when the player is
connected to a timer (not supplied).
OFF
ON
◆ PAUSE MODE
Selects the picture in pause mode.
AUTO
FRAME
◆ DivX
Displays the registration code for this player.
For more information, go to
http://www.divx.com/vod
on the Internet.
US
24
Switches this function off.
The player enters standby mode
when left in stop mode for more
than 30 minutes.
Switches this function off.
Automatically starts playback
when the player is turned on by
a timer (not supplied).
The picture, including subjects
that move dynamically, is
output with no jitter. Normally,
select this position.
The picture, including subjects
that do not move dynamically,
is output in high resolution.

AUDIO SETUP

You can set the sound according to the
playback and connection conditions.
The default settings are underlined.
◆ AUDIO DRC (Dynamic Range Control)
Makes the sound clear when the volume is
turned down when playing a video file that
conforms to "AUDIO DRC."
This function affects the output from the
following jacks:
– LINE OUT (L-AUDIO-R) jacks.
– DIGITAL OUT (COAXIAL)/HDMI OUT
jack only when "DOLBY DIGITAL" is set
to "D-PCM" (page 25).
STANDARD Normally, select this position.
TV MODE
Makes low sounds clear even if
you turn the volume down.
WIDE
Gives you the feeling of being
RANGE
at a live performance.
◆ DOWNMIX
Switches the method for mixing down to 2
channels when you play a video file which
has rear sound elements (channels) or is
recorded in Dolby Digital format. This
function affects the output of the following
jacks:
– LINE OUT (L-AUDIO-R) jacks.
– DIGITAL OUT (COAXIAL)/HDMI OUT
jack when "DOLBY DIGITAL" is set to
"D-PCM" (page 25).
DOLBY
Normally, select this position.
SUR-
Multi-channel audio signals are
ROUND
output to 2 channels for enjoying
surround sounds.
NORMAL
Multi-channel audio signals are
downmixed to 2 channels for use
with your stereo.

Publicité

Chapitres

Table des Matières
loading

Table des Matières