Fm Radio - Panasonic RF-D10 Mode D'emploi

rf-d10eg.book Page 5 Friday, January 3, 2014 4:54 PM
Listening to a station
1
Turn [ TUNE/SELECT ] to select a station from
the station list.
2
Press [ENTER] to tune to the selected station.
Note:
" " indicates a secondary service station. Secondary service
stations are always listed next to their primary station in the
station list.
Presetting stations
You can preset up to 10 stations into the direct preset
buttons.
1
While listening to a station, press and hold the
desired direct preset button ([1] to [10]).
Example: press and hold [2] to store current station
into preset 2.
2
Press [ENTER] to preset the station.
█
Listening to a preset station
Press the direct preset button ([1] to [10]) to listen to the
preset station.
Manual tuning
You can perform manual tuning to a particular channel or
frequency. This can be useful when you are adjusting the
antenna to achieve the best possible reception and
scanning a particular channel to update the station list.
1
Press [MENU].
2
Turn [ TUNE/SELECT ] to select "Manual tune"
and then press [ENTER].
3
Turn [ TUNE/SELECT ] to select a frequency or
channel and then press [ENTER].
The display shows the received signal strength of the
selected frequency. Adjust the antenna to achieve the
best reception.
threshold indicator
Adjust the antenna so that the received signal
strength (solid rectangles) exceeds the threshold
indicator.
Viewing available information
You can view various information about the DAB
broadcast such as dynamic label information (if
available), signal strength, program type, ensemble
name, channel number, bit rate, DAB variant and date.
Press [DISPLAY] to view available information.
Press and hold [DISPLAY] to show the default display.

FM radio

1
Press [BAND] to select "FM".
2
Press [AUTOTUNE] to tune to a station.
The unit stops tuning when it finds a station.
Press [AUTOTUNE] again to tune to the next station.
Manual tuning
Turn [ TUNE/SELECT ] to tune to the required
station.
Presetting stations
You can preset up to 10 stations into the direct preset
buttons.
The first five stations are preset with a default frequency
for your convenience.
1
While listening to a station, press and hold the
desired direct preset button ([1] to [10]).
2
Press [ENTER] to preset the station.
█
Listening to a preset station
Press the direct preset button ([1] to [10]) to listen to the
preset station.
Viewing available information
You can view the information of the radio station such as
RDS text (available in some areas), frequency and date.
Press [DISPLAY].
Note:
RDS may not be available if reception is poor.
printing
5
5