Charging The Battery - Canon EOS 6D Mark II Mode D'emploi

Charging the Battery

LC-E6
LC-E6E
Charge Level
0-49%
50-74%
75% or higher
Fully charged
It takes approx. 2 hr. and 30 min. to fully recharge a completely
exhausted battery at room temperature (23°C / 73°F). The time
required to recharge the battery will vary greatly depending on the
ambient temperature and the battery's remaining capacity.
For safety reasons, recharging in low temperatures (5°C - 10°C /
41°F - 50°F) will take longer (up to approx. 4 hr.).
34
Remove the protective cover.
1
Detach the protective cover provided
with the battery.
Attach the battery.
2
As shown in the illustration, attach the
battery securely to the charger.
To detach the battery, follow the
above procedure in reverse.
Recharge the battery.
3
For LC-E6
As shown by the arrow, flip out the
battery charger's prongs and insert
the prongs into a power outlet.
For LC-E6E
Connect the power cord to the
charger and insert the plug into a
power outlet.
Recharging starts automatically and
the charge lamp blinks in orange.
Color
Orange
Green
Charge Lamp
Display
Blinks once per second
Blinks twice per second
Blinks three times per second
Turned on