Gps Settings - Canon EOS 6D Mark II Mode D'emploi

This chapter describes the camera's built-in GPS
settings. The EOS 6D Mark II can receive satellite
navigation signals from GPS satellites (USA),
GLONASS satellites (Russia), and Quasi-Zenith
Satellite System (QZSS) "Michibiki" (Japan).
The GPS function is set to [Disable] by default.
This manual uses the term "GPS" to refer to the satellite
navigation function.
When [GPS] is set to [Mode 1]
continue to receive GPS signals at regular intervals
even after the camera's power switch is set to <2>.
The battery will thereby drain faster and the number of
possible shots will decrease. When you do not not use
GPS, setting [GPS] to [Disable] or [Mode 2] is
recommended.
When using GPS function, be sure to check the countries and
regions where its use is allowed, and use the function in
accordance with the laws and regulations of the country or region.
Be particularly careful when using GPS outside your home
country.

GPS Settings

, the camera will
(p.143)
5
141