Shooting With The Touch Shutter - Canon EOS 6D Mark II Mode D'emploi

x Shooting with the Touch Shutter
Just by tapping on the LCD monitor screen, you can focus and take the
picture automatically.
Display the Live View image.
1
Press the <0> button.
The Live View image will appear on
the LCD monitor.
Enable the Touch Shutter.
2
Tap [y] on the screen's bottom left.
Each time you tap on the icon, it will
toggle between [y] and [x].
[x] (Touch Shutter: Enable)
The camera will focus on the spot
you tap on, then the picture will be
taken.
[y] (Touch Shutter: Disable)
You can tap on a spot to perform
focusing on the spot. Press the
shutter button completely to take the
picture.
Tap on the screen to shoot.
3
Tap on the face or subject on the
screen.
On the point you tap, the camera will
focus (Touch AF) with the AF method
that was set (p.164-168).
When [x] is set, the AF point turns
green when focus is achieved, then
the picture is taken automatically.
If focus is not achieved, the AF point
turns orange and the picture cannot
be taken. Tap on the face or subject
on the screen again.
169