Canon EOS 6D Mark II Mode D'emploi page 86

C Creative Auto Shooting
(3) Drive mode
For drive modes, see page 116.
(4) AF point selection
If you then press the <B> button in this status, you can select the AF
Area selection mode. When the AF Area selection mode is set to other
than [Auto selection AF], you can use <9> to select the AF point or
zone.
For AF area selection modes, see pages 109-111. For AF point
selection, see page 112.
84
You can select single shooting,
continuous shooting, or self-timer. Turn
the <6> or <5> dial to select the
desired mode.
Pressing <0> will display the screen
shown on the left. Turn the <6> dial to
select the desired setting.
Turn the <6> or <5> dial to select the
desired AF Area selection mode.
Pressing <0> will display the screen
shown on the left. You can then select
the AF Area selection mode and AF
point.