Canon EOS 6D Mark II Mode D'emploi page 114

S Selecting the AF Area and AF Point
Selecting the AF Point Manually
You can manually select the AF point or zone.
AF Point Display Indications
Pressing the <S> or <B> button lights up the AF points that are
cross-type AF points for high-precision autofocusing. The blinking AF
points are horizontal-line or vertical-line sensitive.
112
Press the <S> or <B> button
1
.
(9)
The AF points will be displayed in the
viewfinder.
In the Zone AF mode or Large Zone
AF mode, the selected zone will be
displayed.
Select an AF point.
2
The AF point selection will change in
the direction you tilt <9>. If you
press <0>, the center AF point (or
center zone) will be selected.
You can also select a horizontal AF
point by turning the <6> dial and
select a vertical AF point by turning
the <5> dial.
In the Zone AF and Large Zone AF
modes, turning the <6> or <5>
dial will change the zone (in a looping
sequence for Zone AF).