Charging The Battery - Canon EOS Rebel T7 Mode D'emploi

Charging the Battery

LC-E10
Full-charge lamp
LC-E10E
It takes approx. 2 hours to fully recharge a completely

exhausted battery at room temperature (23°C / 73°F). The time
required to recharge the battery will vary greatly depending on
the ambient temperature and the battery's remaining capacity.
For safety reasons, recharging in low temperatures (6°C - 10°C /

43°F - 50°F) will take longer (up to approx. 4 hours).
26
1
2
3
Charge lamp
Remove the protective cover.
Detach the protective cover provided

with the battery.
Attach the battery.
As shown in the illustration, attach the

battery securely to the charger.
To detach the battery, follow the

above procedure in reverse.
Recharge the battery.
For LC-E10
As shown by the arrow, flip out the

battery charger's prongs and insert
the prongs into a power outlet.
For LC-E10E
Connect the power cord to the

charger and insert the plug into a
power outlet.

Recharging starts and the charge
lamp lights up in orange.

When the battery is fully recharged,
the full-charge lamp will light up in
green.