Key To Symbols Key To Symbols - Husqvarna LC 48 Manuel D'utilisation

Key to symbols
WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Never use the machine if persons,
especially children or pets, are in the
immediate vicinity.
Watch out for thrown objects and
ricochets.
Warning: rotating cutter. Keep hands and
feet clear.
This product is in accordance with
applicable EC directives.
Warning: rotating cutter. Keep hands and
feet clear.
Never use the machine indoors
or in spaces lacking proper
ventilation. Exhaust fumes
contain carbon monoxide, an
odourless, poisonous and
highly dangerous gas.
Risk of explosion
Always shut off the engine before refuelling.
Hot surface
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in chapter Technical data and on
label.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
74 –
English
KEY TO SYMBOLS
Always wear protective gloves.
Regular cleaning is required.
Visual check.
The ignition lead should always be removed
from the spark plug before repair, cleaning
or maintenance work.
Switch off the engine by releasing the
engine brake handle before carrying out
any checks or maintenance.
1 Manufacturer
2 Model
3 Product number
4 Maintenance lever
5 Serial number
6 Type
7 Engine information
8 Weight