Amprobe BAT-200 Mode D'emploi page 10

For 1.5V button cells, read off "BUTTON BATT" scale.4.
If needle does not move,check that battery is touching
both contacts before assuming that it is completely dead.
The Battery Tester may be used to test the following
sizes:
1.5V
9V
Connect the 1.5V button cells
AAA, SH16, MN2400, R03
AA, HP7, MN1500, UM3
C, HP11.MN1400, SO11, LR14, UM2
D, HP2, MN1399, SP2, R20,UM1
PP3,MN1604,6F22,006P
Red = Replace
Yellow = Low Power
Green = Good