Cleaning And Maintenance - Electrolux EDE1074PDW Notice D'utilisation

changed. The child lock function locks all
buttons and the programme knob. The
child lock can be activated or deactivated
by holding down the ZOEMER (BUZZER)
and TIJD (TIME) buttons simultaneously for
5 seconds.
– Before programme is started: Appli-
ance cannot be used
– After programme is started: Pro-
gramme in operation cannot be
changed
The icon appears in the display to indi-
cate that the child safety device is activa-
ted.
The child safety device is not deactivated
once the programme comes to an end.
If you want to set a new programme, you
must first deactivate the child safety device.
STARTING THE PROGRAMME
Press the START/PAUZE (START / PAUSE)
button. The programme is started.
The programme phase is shown in display
by appropriate icons. From left to the right,
from drying ,anticrease
.
CHANGING PROGRAMME
To change a programme which has been
selected by mistake once the programme
has started, first turn the programme selec-
tor to " O" (OFF) position. The programme
is cancelled.
The programme can no longer be
changed directly once the programme
has started. If nevertheless there is an
attempt to change the programme on
the programme knob or if an function
button (excluding the BUZZER button)
is pressed, led above START/PAUSE

CLEANING AND MAINTENANCE

Warning! The tumble dryer is not to be
used if industrial chemicals have been
used for cleaning!
CLEANING FLUFF FILTER
The filter collect all the fluff which accumu-
lates during drying. To ensure that the dryer
DRYING CYCLE COMPLETE /
REMOVING LAUNDRY
Once the drying cycle is complete, display
shows a blinking "0", under anti-crease
and filter
ZOEMER (Buzzer) button has been press-
ed, an acoustic signal sounds intermittently
for about one minute.
, to cooling
1. Open door.
2. Remove laundry.
3. Remove filter after clothes has been re-
4. Turn the programme selector to "O"
Important! Clean the filter after each drying
cycle.
5. Close the door.
works perfectly, the fluff filter must be
cleaned after every drying cycle.
The warning light FILTER
mind you this operation.
button starts flashing temporarily in yel-
low. The drying programme is not how-
ever affected by this (laundry protec-
tion).
icon appear dash. If the
The drying cycles are automatically fol-
lowed by an anti-crease phase which
lasts around 30 minutes. The drum ro-
tates at intervals during this phase. This
keeps the laundry loose and free of
creases. The laundry can be removed
at any time during the anti-crease
phase. (The laundry should be taken
out towards the end of the anti-crease
phase at the latest to prevent creases
from forming.) If ANT-IKREUK (Long
anticrease) function has been selec-
ted, the anti-crease phase is length-
ened by 60 minutes.
moved. Clean the filter.
Warning! Before You place the filter,
please check it there is nothing inside
the filter seat.
(OFF) .
Caution! Never operate the dryer
without fluff filter or with damaged or
blocked fluff filter.
electrolux 11
, is on to re-