Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To adjust the released quantity of rinse aid,
turn the selector between position 1 (lowest
quantity) and position 4 (highest quantity).

Daily use

1. Open the water tap.
2. Press the on/off button to activate the appli-
ance. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND START-
ING A PROGRAMME'.
• If the salt indicator is on, fill the salt con-
tainer.
• If the rinse aid indicator is on, fill the rinse
aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the
type of load and soil.
Using the detergent
1
8
2
A
3
Put the detergent or
the tablet in compart-
ment (A).
B
If the programme has
a prewash phase, put
a small quantity of de-
tergent in compart-
ment (B).
Combi detergent tablets
These tablets contain detergent, rinse aid and
other added agents. Be sure that these tablets
are applicable to the water hardness in your
area. Refer to the instructions on the packaging
of the products.
A
4
www.zanussi.com

Publicité

Chapitres

Table des Matières
loading

Table des Matières