Options - Zanussi ZDT15006FA Notice D'utilisation

1)
Programme
4)
1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of dishes
can change the programme duration and the consumption values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) This is the standard programme for test institutes. With this programme you have the most efficient use of
water and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test
information.
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and
bad odours to come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

Options

Acoustic signals
The acoustic signals operate in these condi-
tions:
• The programme is completed.
• The level of the water softener is adjusted
electronically.
• The appliance has a malfunction.
Factory setting: On.
It is possible to deactivate the acoustic sig-
nals.
How to deactivate the acoustic signals
1. Press the on/off button to activate the appli-
ance. Make sure that the appliance is in set-
ting mode, refer to 'Setting and starting a
programme'.
2. Press and hold function buttons (B) and (C)
at the same time until the indicators of func-
tion buttons (A), (B) and (C) start to flash.
3. Press function button (C),
• The indicators of function buttons (A) and
(B) go off.
www.zanussi.com
Degree of soil
Type of load
All
Programme pha-
ses
Prewash
• The indicator of function button (C) con-
tinues to flash.
• The end indicator comes on.
4. Press function button (C). The end indicator
goes off, the acoustic signals are deactiva-
ted.
5. Deactivate the appliance to confirm the set-
ting.
How to activate the acoustic signals
1. Refer to 'How to deactivate the acoustic
signals', step (1) through (3).
2. Press function button (C),
• The indicators of function buttons (A) and
(B) go off.
• The indicator of function button (C) con-
tinues to flash.
• The end indicator is off.
3. Press function button (C). The end indicator
comes on, the acoustic signals are active.
4. Deactivate the appliance to confirm the set-
ting.
Duration Energy
(min) (kWh)
12 0.1
Water
(l)
3
5