Rigging The 8Xt Or 12Xt Enclosure With The Omnimount; Accessories - L-Acoustics 115XT HiQ Manuel Utilisateur

XT
COAXIAL RANGE -
Rigging Procedures
VERSION 1
6.5

Rigging the 8XT or 12XT enclosure with the OMNIMOUNT

Four predrilled inserts located on the rear face of the 8XT and 12XT enclosures allow for mounting the
®
OMNIMOUNT rigging accessories.
Remove the four screws (they will be employed for fixing the rigging accessory) from the four predrilled inserts and
follow the mounting instructions (provided by the OMNIMOUNT
•
OMNIMOUNT
•
OMNIMOUNT
!
L-ACOUSTICS recommends using an additional safety point when rigging enclosures.
A safety eye-bolt accessory can be added using the 8mm/0.31in insert located on the rear face of
the enclosure (see Figure 18).
WARNING
XTP_RM_ML_1
P
SELF-POWERED COAXIAL RANGE
Figure 18: Inserts on the 12XT enclosure
® 30.0 SERIES mounting accessories for the 8XT enclosure,
®
120.0 SERIES mounting accessories for the 12XT enclosure.
w w w . l - a c o u s t i c s . c o m
®

accessories

Safety insert for safety
eye-bolt accessory
Four predrilled inserts
for OMNIMOUNT ®
mounting accessory
® manufacturer) regarding the:
20 en