Cleaning And Care; Storage - SilverCrest SBT 3.6 B1 Mode D'emploi

Cleaning and care

RISK OF ELECTRIC SHOCK
► Before cleaning, disconnect the appliance from the mains adapter
mains adapter
CAUTION – PROPERTY DAMAGE!
► NEVER submerse the appliance in water or other liquids!
■ After every use, clean the attachment used with the supplied cleaning brush
remove loose hairs.
■ Disinfect the attachment used regularly by spraying and cleaning it with disinfectant
spray.
■ To clean the epilator head
Clean the epilator head
■ To clean the micro shaver
Pull the coloured part from the base of the attachment and then carefully clean the
cutting blades that have now been revealed using the supplied cleaning brush
Then put the two parts of the micro shaver
■ If used regularly, the precision trimmer
occasionally. Use the supplied oil
■ Wipe the appliance, the trimming templates
a moist cloth. If required, use some mild detergent on the cloth. Ensure that the
appliance is completely dry before the next use.
NOTE
► To order replacement parts, please contact the service department (see chapter
"Warranty and service"). Please have the IAN number ready (see operating
manual cover).

Storage

■ Always protect the micro shaver
■ Store the appliance, the attachments
cleaning brush
■ Store the appliance in a dry and dust-free location.
SBT 3.6 B1
from the power supply.
thoroughly, remove it from the hand element
under running water and then allow it to dry.
thoroughly, remove it from the hand element
.
with the supplied protective cap
and the mains adapter
back together.
and the micro trimmer
and the power adapter
/ / / , the trimming templates
in the storage bag
and the
to
.
.
.
should be oiled
with
.
, the
.
│
GB 61 ■