Shaping With The Precision Trimmer; Trimming Eyebrows With The Precision Trimmer And Eyebrow Comb - SilverCrest SBT 3.6 B1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5) Hold the skin tight with one hand.
6) Place the appliance perpendicular to the skin and, without exerting any pressure, move
it against the direction of the hair growth. The flat side of the precision comb
always be set against the skin to achieve an even cut.
7) If a lot of hair has accumulated in the precision comb
blow or shake the hair out.
8) When you are finished with the treatment, push the on/off switch
direction to switch off the appliance.

Shaping with the precision trimmer

To give the bikini line its own form, use the precision trimmer
comb
.
1) Start by removing the precision comb
precision trimmer
2) Push the on/off switch
3) Use the appliance to contour your bikini line as required. Push the precision trimmer
gently against the hair. You can use the precision trimmer
stroke the outer part of the attachment housing across the skin. Let your creativity
run free or use one of the enclosed trimming templates
4) When you are finished with the treatment, push the on/off switch
direction to switch off the appliance.
Trimming eyebrows with the precision trimmer and
eyebrow comb
You can use the precision trimmer
to the same length.
1) Start by removing any other attachment from the hand element
Fit the precision trimmer attachment
grooves in the attachment match up with those on the back of the hand element
2) Push the eyebrow comb
until it clicks into place.
58 
GB
on the hand element
in the direction of the attachment.
and the eyebrow comb
onto the hand element
with its side rails onto the two grooves on the appliance
, remove the comb and
without the precision
from the precision trimmer
.
to create a contour.
must
in the opposite
or fit the
directly on the skin or
in the opposite
to trim your eyebrows
, if required.
so that the two
SBT 3.6 B1
.

Publicité

Table des Matières
loading

Table des Matières