Cleaning And Care - SilverCrest SDK 2500 B1 Instructions D'utilisation Et Consignes De Sécurité

Turning the product on: Set the on/off
to the I position .
switch
[ 4 ]
Turn the corresponding heat level
control to the desired heat level:
5 ] [ [ 8 ]
Heat level
MIN
– 4
4 – MAX
Indicator light
On
Off
NOTES:
The corresponding indicator light
up while the hob
1 ] [
As soon as the selected temperature has been
reached, the indicator light
During operation, it is possible that the
indicator light
6 ] [ 7 ] [
This is not a malfunction of the product,
but an indication that the hob is reheating
occasionally to maintain the temperature .
Once the cooking process is finished, set
the heat level control
MIN position . The corresponding indicator
light goes out .
6 ] [ [ 7 ]
Turning the product off: Set the on/off
to the O position .
switch
[ 4 ]
Disconnect the power plug
socket-outlet .
22 GB/IE
Description
Stop heating up
Slow cooking
Fast cooking
Status
[ 6 ] [ 7 ]
Product is
preheating/
reheating .
The set
temperature has
been reached .
lights
[ 6 ] [ 7 ]
is heating up .
3 ] [
goes off .
[ 6 ] [ 7 ]
switches on and off .
back to the
5 ] [ [ 8 ]
from the
[ 9 ]
˜ Cleaning and care
m DANGER! Risk of electric shock! Before
cleaning: Always disconnect the product from
the socket-outlet .
DANGER! Risk of burns! Do not clean
the product right after operation . Let the
product cool first .
m WARNING! Do not immerse the product's
electrical components in water or other
liquids . Never hold the product under running
water .
Do not let any water or other liquids enter the
product interior .
m ATTENTION! Do not use any abrasive,
aggressive cleaners, hard brushes, or sharp
objects to clean the product or its accessories .
Risk of product damage .
Wipe the housing with a slightly damp cloth .
If necessary, use a small amount of washing-
up liquid .
After cleaning: Let the product dry .
˜ Storage
DANGER! Risk of burns! Do not store the
product right after operation . Let the product
cool first .
Before storage: Clean the product .
Wind the power cord
storage . Clip the power cord to the cord
[ 2 ]
clip .
10 ] [
Store the product in the original packaging
when it is not in use .
Store the product at a dry location out of the
reach of children .
Do not store the product in a vertical position .
around the cord
9 ] [