Cleaning And Care; Storage; Fault Rectification - SilverCrest SDK 2500 A1 Mode D'emploi

Cleaning and care

RISK OF ELECTRIC SHOCK
► Before cleaning, ALWAYS remove the plug from the mains power socket.
Never submerse the appliance in water or other liquids.
WARNING! RISK OF INJURY!
► Allow the appliance to cool down before cleaning it!
CAUTION - PROPERTY DAMAGE!
► Do not use abrasive, chemical or caustic cleaning agents to clean this appliance!
These can damage the appliance.
■ Wipe the appliance with a damp cloth. For stubborn soiling use a mild detergent
on the cloth.
Ensure that you remove all detergent residues with a moist cloth afterwards.
■ Please wait until the appliance is completely dry before using it again.

Storage

■ Store the appliance in a dry and dust-free place.
Fault rectification
Malfunction
The appliance is
not working.
│ GB │ IE
■ 18
Cause
The plug is not inserted into
a mains power socket.
The appliance is defective.
The appliance is not
switched on.
Solution
Connect the plug to the power
supply.
In this case, contact the Customer
Service.
Switch the appliance on using the
On/Off switch .
SDK 2500 A1