Chronograph Mode - Timex IRONMAN TRANSIT+ Mode D'emploi

Remark: CHRONO is Workout Time.

CHRONOGRAPH MODE:

Press button C until the mode prompt shows "CHRO". The watch will enter the chronograph display with prompt
"CHRONO" displayed on the upper row. The Time of the Chronograph is displayed at the lower row.
Press button B to start or stop the Chronograph. Press button D while chronograph is running to take "Lap" time
measurement. "Lap" time view will be released in 5 sec automatically.
Press and hold button D while chronograph is stopped to clear the chronograph.
LOOP TIMER MODE:
Press button C until the mode prompt shows "TIMR". The watch will enter the Loop Count Down Timer display
with segment (SG-1 .. SG-6) displayed on the left upper row. The loop counter is displayed at the right upper
row. The Count Down Time is displayed at the lower row.
Press button D to select the segment from SG-1 to SG-6.
Press button B to start or stop the timer operation.
6