Accessories Provided - SORHEA BIRIS II 50 Notice D'installation

SORHEA
The barriers are from 0.7 m / 2.3 ft to 1.0 m / 3.3 ft in height relative to the ground or in a column.
BIRIS II type 100 and 200
Precautions regarding installation
To install the barriers correctly, it is important to follow certain guidelines.
Do not mount the barrier on an unstable support
(ex: wire mesh, poorly sealed posts, etc.)
Channel 1
Channel 2
Housing
Plate
Top cell
Control unit
Bottom Cell
Joint
Infrared Cover
Do not install receiver in direct or
reflected sunlight, nor in front of a
highly reflective surface.
Receiver
When the barriers are stacked, make
sure they are configured with different
channels.
- 20 -
BIRIS II type 50

ACCESSORIES PROVIDED:

8 mounting screws 4.8 x 60
-
- 8 Lag shields
5° mini
Verify that no vegetation is blocking
the beams in any season.
BIRIS II 50/100/200
Transmitter