Appliance Self-Test; Starting The Appliance Self-Test; Ending The Appliance Self-Test; Customer Service, Product / Production Number And Technical Data - Bosch KGN Série Notice D'utilisation

Masquer les pouces Voir aussi pour KGN Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Appliance self-test

Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.

Starting the appliance self-test

1. Switch off the appliance and wait
5 minutes.
2. Switch on appliance and press and
hold the button „-" for 3-5 seconds
within the first 10 seconds, until an
audible signal sounds.
The self-test programme starts.
While the self-test is running, a long
acoustic signal sounds.
When the self-test ends and an acoustic
signal sounds twice, your appliance is
in working order.
If 5 audible signals sound, there is an
error. Inform customer service.

Ending the appliance self-test

When the programme has ended, the
appliance switches over to normal
operation.
Customer service,
product / production
number and technical
data
Customer service
If you have any queries, are unable to
rectify faults on the appliance yourself or
if your appliance needs to be repaired,
contact Customer Service.
You can solve many problems yourself
by consulting the information on
troubleshooting in these instructions or
on our website. If this is not the case,
contact our Customer Service.
We will always find an appropriate
solution and try to avoid unnecessary
visits being made by a Customer Service
technician.
With any warranty claims, we will make
sure that your appliance is repaired by
trained Customer Service technicians
using genuine spare parts, including
after the manufacturer's warranty has
expired.
For safety reasons, repairs to the
appliance should only be carried out by
trained specialist staff. The warranty
claim becomes void if repairs or
interventions have been carried out by
persons not authorised by us for that
purpose or if our appliances have been
fitted with spare, supplementary or
accessory parts that were not genuine
parts and then resulted in a defect.
Function-relevant genuine spare parts
according to the corresponding
Ecodesign Directive can be obtained
from Customer Service for a period of at
least 10 years from the date on which
your appliance was placed on the market
within the European Economic Area.
en
43

Publicité

Table des Matières
loading

Table des Matières