Stand-By Function - LAVAZZA A MODO MIO Jolie Plus Mode D'emploi

EN I T
The machine rear features two outlets that can be used
for the power cord. You should use the most suitable
outlet for your needs.
Fit the supply plug into the power outlet.
Press one of the switch-on/supply buttons to switch
the macchine on.
MACHINE SETTING
The coffee machine starts the heating cycle. The switch-
on/supply buttons will start blinking to a light white.
During the heating cycle, you can book the drink, press-
ing one of the switch-on /supply buttons. The drink will
be released after the end of the heating cycle.
The machine will be ready for use when the switch-on/
supply buttons light up to a steady white light white
light.
At first power-on, supply at least 0.5 litres of water with-
out capsule placing a container under the coffee spout.

STAND-BY FUNCTION

To ensure the energy conservation the machine au-
tomatically passes to the stand-by mode after 9 min-
utes of not being used. The machine can be set to the
stand-by mode manually, first of the 9 minutes' time,
by keeping both buttons pressed down for at least 3
seconds. This mode is indicated by the switching off of
the buttons. The machine can be reactivated by press-
ing the buttons again.
22