Kenwood DNX7100 Mode D'emploi page 40

c  s
hanGinG the ettinGs
Voice Language—change the language for all voice
prompts and messages. Touch the voice you want to use
and touch oK.
Two different types of voice languages are available:
text-to-speech and pre-recorded.
Languages noted with a person's name and (TTS) are
text-to-speech (TTS) voices: for example, American
English-Jill (TTS) is a text-to-speech voice. The text-
to-speech voices "read" and "speak" the same words
that are displayed on the screen. The voices have an
extensive vocabulary, and they pronounce the street
names as you approach turns.
Languages without a person's name are pre-recorded
voices, which have a limited vocabulary and do not
speak names of locations or streets.
Note: If you change the Voice Language, you
must restart to complete this change.
EN-
Text Language—change the on-screen text to the
selected language. Changing the text language does not
change the language of map data or user-entered data.
Speech Rate—select the rate at which prompts are
spoken.
Customizing the Audio Settings Audio Settings
From the Menu page, touch
Audio.
Attention Tone—turn on or off the attention tone
sounded before voice prompts.
Touch Screen Tone—turn on or off the tone sounded
each time you touch the screen.
DNX7100 GPS Navigation Instruction Manual
Settings > General >