Audio Settings - Sony STR-DA2800ES Mode D'emploi

• FL/FR, FL/CNT, CNT/FR, FR/SR,
SR/SBR, SR/SB*, SBR/SBL, SR/SL,
SB/SL*, SBL/SL, SL/FL, LH/RH,
FL/SR, SL/FR, FL/RH, LH/FR
*"SR/SB" and "SB/SL" appear when only one
surround back speaker is connected.
Lets you output front 2 channel source
sound (instead of the test tone)
sequentially from adjacent speakers.
Some items may not be displayed,
depending on the setting of the speaker
pattern.
3
Adjust "Level," then press
Distance Unit
Lets you select the unit of measurement for
setting distances.
x meter
The distance is displayed in meters.
x feet
The distance is displayed in feet.

Audio Settings

You can adjust settings for the audio to suit
your preference.
Digital Legato Linear (D.L.L.)
The D.L.L. function is Sony proprietary
technology that allows low quality digital
audio signals and analog audio signals to be
played back with high quality sound.
.
x Off
x Auto 1
This function is available for lossy
compression audio formats and analog audio
signals.
x Auto 2
This function is available for Linear PCM
signals, as well as lossy compression audio
formats and analog audio signals.
Notes
• This function may not work, depending on the
content via a USB device, or a home network.
• This function works when "A.F.D. Auto" is
selected. However, this function does not work in
the following cases.
– Linear PCM signals with a sampling frequency
of other than 44.1 kHz are being received.
– Dolby Digital Plus, Dolby Digital EX, Dolby
TrueHD, DTS 96/24, DTS-ES Matrix 6.1, DTS-
HD Master Audio, or DTS-HD High Resolution
Audio signals are being received.
Sound Optimizer
Lets you set the sound optimizer function
(page 63).
x Off
x Low
x Normal
97 US