Easy Setup; Speaker Settings; Auto Calibration - Sony STR-DA2800ES Mode D'emploi

Easy Setup

Re-runs the Easy Setup to make the basic
settings. Follow the on-screen instructions
(page 44).

Speaker Settings

You can set up your viewing environment
(with the speaker system you are using) either
automatically or manually.

Auto Calibration

Performs the D.C.A.C. (Digital Cinema Auto
Calibration) function. This function allows
you to perform automatic calibration, such as
checking the connection between each speaker
and the receiver, adjusting the speaker level,
and measuring the distance of each speaker
from your seating position automatically.
Calibration Matching
When Auto Calibration is executed, this
function works automatically, matching the
distance and level of the right and left
speakers. You can set this function only after
the DCAC measurement process has been
completed and the results of the DCAC
measurement are saved. The setting is valid
until you change it.
Note
The previous measurement results will be
overwritten and the current results are saved for the
currently selected position.
Please read "Notes on Speaker Settings (Auto
Calibration)" in "9: Setting up the receiver using the
Easy Setup" (page 44).
Auto Calibration Setup
Lets you register three patterns for "Position,"
depending on the seating positions, listening
environment, and measurement conditions.
You can also select a calibration type to
compensate the each speaker.
Position
You can register more than one set of settings
for the listening environment or recall a set of
settings.
continued
93 US