Storage - Philips 4500i Série Mode D'emploi

1
Turn off the air purifier and
unplug from the power socket.
2
Take out the used air filter
according to the filter alert light
status displayed on the screen.
Discard used filters (fig. }).
Note
• Do not touch the pleated filter
surface, or smell the filter as it
has collected pollutants from
the air.
3
Remove all packaging material of
the new filters (fig. f).
4
Put the unpacked air
purification filters back into the
appliance (fig. g).
5
Put the plug of the air purifier in
the power socket.
6
Touch the button to switch on
the appliance.
7
Touch and hold the reset button
for 3 seconds to reset the
filter lifetime counter.
Note
• Wash your hands after changing
filters.
7

Storage

1
Turn off the air purifier and
unplug from the wall outlet.
2
Clean the air purifier, air quality
sensor and pre-filter (see
chapter 'Cleaning').
3
Let all parts air dry thoroughly
before storing.
4
Wrap the filters and pre-filter
separately in air tight plastic
bags.
5
Store the air purifier, filters and
pre-filters in a cool, dry location.
6
Always thoroughly wash hands
after handling filters.
EN
15