Warranty Claims - Exclusion Of Liability; Certificates - Guidelines; Shipping; Receipt - Helios MiniVent M1/100 N/C Notice De Montage Et D'utilisation

Masquer les pouces Voir aussi pour MiniVent M1/100 N/C:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation and Operation Instructions
UK
IMPORTANT
NOTE
NOTE
NOTE
MiniVent M1/100/120 N / C
1.3
Warranty claims – exclusion of liability
All versions of this documentation must be observed, otherwise the warranty shall cease to apply. The same applies
to liability claims against Helios. The use of accessory parts, which are not recommended or offered by Helios, is not
permitted. Any possible damages are not covered by the warranty. Changes and modifications to the unit are not per-
mitted and lead to a loss of conformity, and any warranty and liability shall be excluded in this case.
1.4

Certificates - guidelines

If the product is installed correctly and used to its intended purpose, it conforms to all applicable EU guidelines at its
date of manufacture.
1.5

Shipping

The fan is packed ex works in such a way that it is protected against normal transport strain. Carry out the shipping
carefully. It is recommended to leave the fan in the original packaging.
1.6

Receipt

The shipment must be checked for damage and correctness immediately upon delivery. If there is any damage,
promptly report the damage with the assistance of the transport company. If complaints are not made within the ag-
reed period, any claims could be lost.
1.7

Storage

When storing for a prolonged time, the following steps are to be taken to avoid damaging influences: Motor protec-
tion by dry, airtight and dust-proof packaging (plastic bag with desiccant and humidity indicators). Vibration-free, wa-
ter-tight and constant-temperature storage at a temperature in the range -20 °C to +40 °C.
In case of a storage period of more than three months or motor standstill, maintenance must be carried out before
start-up according to chapter 4. In case of reshipment (above all, over longer distances; e.g. by sea), it must be
checked whether the packaging is suitable for the form and route of transport. Damages due to improper transporta-
tion, storage or putting into operation are not liable for warranty.
1.8

Application

– Normal use:
The MiniVent M1/100/120 N / C mini fans are suitable for conveying normal or slightly dusty (particle size < 10 µm),
less aggressive and humid air, in moderate climates and in the range of their performance curves, see Helios sales do-
cuments / internet. Operation is only admissible with fixed installation within buildings. The maximum admissible me-
dia and ambient temperature is 40 °C. MiniVent M1/100/120 N / C mini fans correspond to protection category IP45,
protection class II and may be installed in area 1 wet rooms according to VDE 0100 part 701.
– Reasonably foreseeable misuse:
The fans are not suitable for operation under difficult conditions, such as high levels of humidity, aggressive media,
long standstill periods, heavy contamination, excessive loads due to climatic, technical or electronic influences. The
same applies for the mobile use of fans (vehicles, aircraft, ships, etc.). Usage under these conditions is only possible
with release approval from Helios, as the standard version is not suitable in this case.
– Improper, prohibited use:
Any use other than the intended use is not permitted! The conveying of solid matter or solid matter content > 10µm
in air and liquid is not permitted. Transport media, which affect the materials of the fan, and abrasive media are not
permitted. Use in explosive atmospheres is not permitted!
2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Minivent m1/120 n/c

Table des Matières